Quick Fold Bend Tabs
The Bend Tab Clamps incorporated into the top of our brackets are designed to be used with our revolutionary rail-less module clamping system, but they can also be used with most all rail based systems as well. When quickly folded over with a flathead screwdriver, it clamps the solar module frame directly to the IR-F1 Rail-Less Module Flange Clamp Bonding Bracket, bonding it and locking the solar module firmly in place. For mid-row brackets, you can bend each tab in a different direction, and for end modules the tabs can both be bent the same direction for added clamping tension.
Install Takes Less Than 1-Minute
The IR-D2 Wide Foot TPO Roof Mount is the fastest and easiest solution on the market and can be installed in less than 1 minute! Scroll down to view our 4-step installation process.
No Penetration Required
This bracket can be mounted using nothing but a fast setting polyurethane sealant to hold it down for up to 200 pounds of uplift per bracket, but it can also be bolted to the roof for added strength. The IR-D2 allows for flat, low profile mounting of solar modules on TPO roofs, and incorporates micro-inverter/solar optimizer mounting points on each bracket.
Take a Look at Our Simple 4-Step Process Below on Installing Your Modules From Start to Finish...
-
Step 1: Clean mounting surfaces.
-
Step 2: Measure and mark.
-
Step 3: Use spreader to apply adhesive.
-
Step 4: Firmly press bracket into place.
